Trade supply, Trinidad and Tobago 868 235 5020 [email protected]
Trade supply, Trinidad and Tobago 868 235 5020 [email protected]
Two-pack acrylic satin clear lacquer for a uniform low-gloss finish over ProMIX Eclipse basecoat, particularly suited to bumpers and trim with a satin factory finish.
Trade supply, so prices are not published. Add everything you need, send the list, and we reply with pricing and availability within one working day.
No data sheet listed? Ask us for it and we will send the current version.
ProMIX Eclipse ESLC is a 2K MS acrylic clear that cures to a satin sheen rather than full gloss. It works well on bumpers and other parts that leave the factory with a low-gloss finish, and can also be used for panel repairs and full resprays.
Apply it as the clear layer over Eclipse basecoat, mixed 2:1 with an Eclipse activator chosen to suit workshop temperature. Two coats give the recommended film build, and it can be force dried at 60°C or with short-wave infrared to speed up throughput.
The finish is even and smooth to the touch, helping the repair blend with surrounding satin surfaces.
| Mix ratio | 2:1 with Eclipse activator (EMSS slow / EMSN normal / EMSF fast) |
|---|---|
| Thinner | 15–20% Eclipse thinner |
| Spray viscosity | 16–18 s DIN 4mm at 20°C |
| Pot life | 3–5 hours at 20°C |
| Gun set-up (compliant) | 1.3–1.5mm nozzle, 2.0–2.5 bar inlet |
| Gun set-up (HVLP) | 1.3–1.5mm nozzle, 0.7 bar at air cap |
| Coats | 2 coats, 50–60 µm |
| Flash-off | 15–20 min between coats and before drying |
| Drying | 15 min before raising temperature, then 45 min at 60°C panel temperature; short-wave IR 8 min (over 60cm from lamp) |
| Gloss level | 66 ± 5 at 60° |
| Coverage | 6–7 m²/L at 50 µm (theoretical) |
| VOC | Max. 580 g/L ready to spray (EU limit IIB.d 840 g/L) |
| Solids | 47.5% by volume ready to spray |
| Pack | 1L Clear, 1.5L Kit with EMSN |
|---|---|
| System | 2K |
Call the trade line and quote the product code, or send us the job details.
Products painters usually add to the same quote.
Fill out the form with your details and a team member will be in touch to discuss your needs!
Fill out the form with your details and a team member will be in touch to discuss your needs!
Fill out the form with your details and a team member will be in touch to discuss your needs!
Fill out the form with your details and a team member will be in touch to discuss your needs!
Fill out the form with your details and a team member will be in touch to discuss your needs!
