Trade supply, Trinidad and Tobago 868 235 5020 [email protected]
Trade supply, Trinidad and Tobago 868 235 5020 [email protected]
Generation20 High Solids 4:1 2K acrylic primer filler kit with hardener, for high-build sanding primer, wet-on-wet sealer or plastic priming on spot repairs and resprays.
Trade supply, so prices are not published. Add everything you need, send the list, and we reply with pricing and availability within one working day.
No data sheet listed? Ask us for it and we will send the current version.
This Generation20 kit supplies a 2K high-build acrylic primer together with its hardener, covering spot repairs through to full resprays. It fills minor surface marks and leaves a level base for the topcoat.
Mixed 4:1 with hardener and 15–20% thinner, two full coats build 120–150 µm for block sanding. Thinned further, it can be applied as a wet-on-wet sealer or as a primer on plastic bumpers.
The primer dries quickly, especially when baked at 60°C, and produces a fine powder when sanded so paper clogs less. It is available in black, white and grey.
| Mix ratio | 4:1 with hardener; add 15–20% ProXL Universal Thinner for high build, 50–60% for wet-on-wet or plastics |
|---|---|
| Pot life | 55–70 min at 23°C |
| Coats | High build: 2 full coats; wet-on-wet: 1–2 medium coats; plastics: 1–2 coats |
| Flash-off | 5–10 min at 23°C (high build, plastics); 20–30 min before topcoat when wet-on-wet |
| Gun setup | Compliant gun 1.5–1.8 mm at 2–2.5 bar, HVLP 1.5–1.7 mm at 1.5–2 bar (high build); 1.3–1.4 mm for wet-on-wet and plastics |
| Drying | High build: 3 h at 23°C or 20–30 min at 60°C; plastics: 1–1.5 h at 23°C |
| Dry film thickness | 120–150 µm (high build, 2 coats); 20–30 µm (wet-on-wet) |
| Coverage | 6 m²/litre at 120 µm |
| VOC | 500 g/l ready to use without thinners |
| Shelf life | Use within 12 months; 24 months in unopened containers |
| Colour | Black, Grey, White |
|---|---|
| Kit Size | 5L, 1.25L |
| Substrate | Bare Steel, E-Coat, Existing Paintwork, Fibreglass, Polyester / Body Filler |
| System | 2K |
Call the trade line and quote the product code, or send us the job details.
Products painters usually add to the same quote.
Fill out the form with your details and a team member will be in touch to discuss your needs!
Fill out the form with your details and a team member will be in touch to discuss your needs!
Fill out the form with your details and a team member will be in touch to discuss your needs!
Fill out the form with your details and a team member will be in touch to discuss your needs!
Fill out the form with your details and a team member will be in touch to discuss your needs!
